BF-CT 600 GRAMS - OVAL ULTRA SOFT SILICONE BREAST FORMS (PROSTHETIC/PROSTHESIS)

BF-CT 600 GRAMS - OVAL ULTRA SOFT SILICONE BREAST FORMS  (PROSTHETIC/PROSTHESIS)
Click to enlarge
Sale Price: $109.95
Compared at: $122.18
You Save: $12.23
Product ID : -CT 600 GRAMS - OVAL ULTRA SOFT SILICONE BREAST FORMS (PROSTHET

Purchase

Description

BF-CT 600 GRAMS EACH -
OVAL ULTRA SOFT SILICONE BREAST FORMS !
(PROSTHETIC/PROSTHESIS)
(1 PAIR)


YOU WON'T FIND THESE ANYWHERE ELSE, THEY ARE
EXCLUSIVELY MANUFACTURED FOR TGFASHIONS.COM !

These are the softest silicone breastforms we have ever seen.
They feel like flesh on the chest.
The forms are oval with a slight concave back with a nice nipple.
The oval shape gives a nice realistic droop.

SIZE : 600 Grams = @ 40DD, 42D, 44C, 46B

PRICE : WAS $ 122.18 - SALE DISCOUNT = $ 109.95 !

OTHER SIZES FOR BF-CT BREAST FORMS ARE AVAILABLE
ON THIS WEB SITE !


Please note that the Sizes Listed Are Aproximate.

If you have a good deal of existing chest flesh then we recommend ordering a size smaller than what the chart says.

Like any form they must be handled very carefully to avoid any punctures in the polyurethane occurring from a sharp object such as a ring or fingernail We recommend rinsing these with warm water and a mild soap such as Ivory and then patting them dry before storing them after use. This will help remove any perspiration or other material that may hurt the forms after extended exposure.


NOTE :
These sizes are liberal and based upon you have some of your own flesh to push them out.
If you are very flat you might considering going up a size to compensate.

NOTE :
All of our forms may be attached via medical adhesive. We do warn that when pulling them off to remove them from the skin there will always be a danger of creating a tiny tear in the polyurethane shell. If the tear is extremely small you will not notice anything unusual other than a slushy look of the silicone. If the hole is large enough them you will see a heavy liquid start to ooze out. When worn in the correct sized bra the forms should fit securely inside without the need of an adhesive. For the feeling of breasts on the chest there is nothing that creates that feeling better than our jiggle bras.

TIPS FOR ATTACHMENT : Most breastforms are made with a polyurethane coating bottom filled with silicone (a heavy liquid) and then sealed with a final polyurethane coating. If you look carefully at the edges of the breastform you will see the polyurethane film.
When attaching the forms to the body, one always takes a chance of tearing a small hole in the coating. It would like gluing a ballon to the wall and then gently pulling it off. One neds to do it with the utmost care or the wall will tear. Sometimes the hole can be so small that air enters but the liquid cannot escape initially from the hole. Thus one gets a squishy effect of mush inside the forms. This can occur in even the best breastforms so we urge anyone attaching to be extremely careful when applying and removing the forms.
The first consideration when attaching is the glue that is used to make the attachment. We recommend FDA approved materials such as the 7730 medical adhesive by Hollister. There are other medical adhesives such as one made by Smith and Nephew but that particular formula contains latex which many people react negatively to it. Also the Smith and Nephew is a very heavy glue which many people tend to not clean completely after using and thus find a huge build up occurring that is very difficult to remove.

NEVER use two different types of adhesive at the same time otherwise you run the risk of a chemical reaction/interaction that may be detrimental to your breast form or your skin.

PREPARATION : To maximize the adhesion always wash the area of skin in question first and we strongly recommend the skin area is clean-shaven. After washing you should then rub alcohol or witch hazel over the clean area to remove any soap residue. Soap tends to remain on the skin when washing and will act as a barrier between the skin and adhesive, thus leading to an unsuccessful attachment. (If you are having problems with the lower percentage of alcohol brands then trying going to the higher 91% proof or even higher.)

ATTACHMENT : Firstly, put on a bra that gives the form a nice secure fit. Next, place the forms, one at a time, on your chest and trace the outline with an eye pencil onto your skin. Spray a light layer of Hollister 7730 adhesive onto the back of the breastform and allow it to set for 5 -10 seconds (Some people prefer leaving a gap at the bottom end of the form which will allow the silicone breast to move more easily with the body). Place the form in the pre-marked area and rotate the form lightly so that the adhesive transfers to the skin. Remove spray the form again and leave to rest whilst you do the same with the other form/side of chest. Now place the form firmly onto the previously marked area on the chest that now has a residue of adhesive on it. Then pull up the bra cup to hold the form snuggly against the chest wall. Repeat the process with the second silicone breast form and leave in place supported by the bra for 10-20 minutes. Gently remove the bra and you should be free to move around if you have followed all the steps correctly. Larger forms should always be partially supported with the use of a bra. If using tapes then follow the same steps. Personally, I have a diffiuclt time attaching because of my skin make up. The best attachment I found involved me just pressing each breastform tightly onto my chest for 10 minutes. Afterwrads they had a nice strong seal. Most people will find the traditional method indicated above to be satisfactory for them. REMOVING THE BREAST FORMS : In order to detach the breastform - carefully--I mean CAREFULLY-- pull the form away from the skin, taking care not to damage the silicone form. After they are removed, breast forms should have the adhesive residue removed immediately. Use a recommended adhesive remover that gently removes tape and adhesive residues. I do not recommend the ostomy medical adhesive removers because they are designed to remove adhesive from skin and not from the forms. Use cotton wool to apply the solvent to the adhesive area and then wipe clean. A quick, no fuss method to remove adhesive from forms is to pour some remover onto a large flat dinner plate, place the form adhesive side down, wrap cling-film/plastic-wrap over the form and plate and leave for an hour or two. The adhesive then dissolves. Once adhesive has been removed from the forms, they should be washed in warm soapy water. Regular cleaning, care and maintenance of silicone breast forms will inevitably extend their life. CAUTION : Once the polyurethane film has been pierced the liquid will leak out. The only measure to stop this is by use of a flexible Scotch Tape though this will only temporarily stop the disintegration of the form. (We have been told by some of our customers of successfully using waterbed sealers to seal the puncture.) Keep sharp objects away from silicone breast forms (including jewelry and sharp finger nails) at all times and when not in use store them in the boxes they came in.

Our Youtube Video About
Attaching Silicone Breast Forms With Hollister Glue




Product Reviews

Login or Register to write the first review.

Products You May Like

NIP1 Attachable Nipples
Attachable Nipples
$9.95
$5.95
Perfect Perky Nipples
Hot Deal
Perfect Perky Nipples
$14.99
$9.99
BF-CT 300 GRAMS - OVAL ULTRA SOFT SILICONE BREAST FORMS (PROSTHETIC/PROSTHESIS)
BF-CT ULTRA SOFT OVAL BREASTFORMS These are the softest silicone...
$69.99
$59.95